Table of Contents
Advertisement
2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-364
The TS-364 is equipped with an Intel® Celeron® N5105/N5095 quad-core processor (up to 2.9 GHz burst)
and can support up to 16 GB of DDR4 memory. The HDMI connections provide 4k multimedia output and the
USB One Touch Copy feature allows for easy data backup and synchronization. In addition to its two memory
slots, the TS-364 comes with two M.2 PCIe SSD slots to accommodate your data management needs.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the
Ordering P/N
TS-364-N5095-4G
Component
Processor
CPU
Frequency
Architecture
Encryption engine
Graphics
Memory
Pre-installed memory
Memory slots
Maximum memory
Flash memory
Storage
Drive bays
QNAP Warranty Terms and
4 GB
Intel® Celeron® N5105/N5095
4-core/4-thread up to 2.90 GHz burst
64-bit x86
AES-NI
Intel® UHD Graphics
4 GB RAM: 1 x 4 GB DDR4 SODIMM
2 x DDR4 SODIMM
Important
Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more
than one memory slot, use QNAP modules with
identical specifications.
Using unsupported modules may degrade
performance, cause errors, or prevent the operating
system from starting.
16 GB RAM: 2 x 8 GB
5 GB (dual-boot OS protection)
3 x 3.5-inch SATA 6 Gbps
Conditions.
Memory
TS-364-N5095-4G
TS-364 User Guide
Product Overview
4
Advertisement
Table of Contents
