Audio Alert - QNAP TS-364 User Manual

Audio Alert

Duration
Short beep (0.5 seconds)
Long beep (1.5 seconds)
Frequency
1
3
3 (every 5 minutes)
2
1
Description
• The NAS is starting up.
• The NAS is shutting down.
• When the reset button is pressed for 3 seconds,
the NAS resets configurations.
• When the reset button is pressed for 15 seconds,
the NAS resets configurations and reboots
• The operating system was updated.
• The NAS data cannot be copied to the external
storage device connected to the front USB port.
• The system fan is not functioning.
• The disk volume is about to reach its full
capacity.
• The disk volume has reached its full capacity.
• The drives are in degraded mode.
• The drive is rebuilding.
• A drive is plugged in or out.
• The NAS was powered off by force shutdown
(hardware shutdown).
• The NAS was powered on successfully and is
ready.
TS-364 User Guide
Basic Operations 45