Table of Contents
Advertisement
c. Check the value for Total memory.
QTS Installation
The TS-364 uses the QNAP QTS operating system. You can install QTS using any of the following methods.
Method
Qfinder Pro installation
(Recommended)
Cloud installation
Local installation
Installing QTS Using Qfinder Pro
Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
Important
To protect your NAS from brute force attacks, create a new system administrator account
during QTS installation to disable the default "admin" account.
1. Power on the NAS.
Description
If the NAS is connected to your local area
network, you can do the following:
• Locate the NAS using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see
Installing QTS Using
Qfinder
Pro.
If the NAS is connected to the internet,
you can do the following:
• Scan the QR code on the NAS.
• Specify the Cloud Key.
• Log into your myQNAPcloud account.
• Use myQNAPcloud Link to remotely
access your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see
Installing QTS Using the
Cloud
Key.
If the NAS supports HDMI output, you can
do the following:
• Connect the NAS to the required
hardware.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see
Installing QTS Using an
HDMI
Connection.
TS-364 User Guide
Requirements
• Computer
• Network cable
• Qfinder Pro installer
• Computer or mobile device
• Network cable
• myQNAPcloud account
• Cloud Key
• Monitor
• HDMI cable
• USB keyboard or Remote
control (not available on all
models)
Installation and Configuration
36
Advertisement
Table of Contents
