Gigaset SL800 H PRO Instruction Manual page 11

Once registration is complete, the handset returns to idle mode. Shown on the idle display is the
name set on the Gigaset N870 IP PRO for the handset (user name or display name). If it is not,
repeat the procedure.
Your phone is now ready for use.
The handset can be registered with up to four base stations. Changing the base:
OK
Some Gigaset bases and bases/routers from third party manufacturers might not be
fully compatible with the handset and not all functions are displayed correctly. In such
cases, use menu option Basic Registration. This guarantees correct displays on the
handset, but can entail restrictions for some functions.
Attaching the belt clip
The handset has notches on each side for attaching the belt
clip.
•
Attaching the belt clip:
back of the handset so that the tabs on the belt clip click
into place in the notches.
•
Removing the belt clip:
clip firmly with your right thumb.
your left thumb up between the clip and the casing.
Slide the clip upwards to remove.
Connecting the headset
Connect the headset with 3.5 mm jack to the left side of the
handset .
1
or
Connect headset via Bluetooth (
Setting the headset volume:
Connecting the USB data cable
For data exchange between the handset and PC:
Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset
Connect the handset directly to the PC, not via a
USB hub.
Settings OK
select the base OK
Press the belt clip onto the
Press the centre of the belt
Push the nail of
p. 41)
p. 49
Registration OK
.
1
Handset
Select Base
1
1
11