Table of Contents
Advertisement
Colour Hue Setting
(color temperature)
STANDARD
STANDARD
HIGH
HIGH
LOW
LOW
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
COLOR
(S-VIDEO/VIDEO/YP
Press the
button to make the
colour more vivid in tone, and press
the
button to make the colour
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YP
This adjusts the flesh tones in the
picture. Press the
make flesh tones more greenish,
and press the
flesh tones more reddish.
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the
button if black areas are
too light (grey rather than black).
CONTRAST
This adjusts the contrast of the
picture. Press the
make the picture brighter, and press
the
button to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
SHARPNESS
Press the
button to make the
picture details sharper, and press
the
button to make the picture
details softer.
36-E
NGLISH
P
only)
B
R
P
only)
B
R
button to
button to make the
button to
Noise Reduction (NR)
(When S-VIDEO/VIDEO/YP
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the
button. To turn it off ,
set to "0" by pressing the
TV SYSTEM
(S-VIDEO/VIDEO only)
AUTO1
AUTO2
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
AUTO1 The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
NOTE:
• This should normally be set to
"AUTO1" or "AUTO2". If the signal
is of such poor quality that the
correct format cannot be
automatically distinguished,
change the setting manually to the
required TV system.
P
B
R
button.
Advertisement
Table of Contents
