Unit Assembly Prior To Installation - Regency Fireplace Products Grandview G800C Owners & Installation Manual

installation

Unit Assembly Prior to Installation

After the framing has been built, the nail-
ing Flanges will need to be set depending
on the depth of finishing material being
used. Up to 1-1/4" total material thick-
ness can be used, including the backing
material. The depth of finishing material
can be adjusted in 1/4" increments.
1. Determine the required depth set-
ting for the materials being used.
2. Once the setting has been chosen,
install the Left and Right Nailing
Flanges with 2 screws on each
Flange.
42 | Grandview G800C Gas Fireplace
®
Left Nailing Flange
Nailing Flange Parts
Finishing
Material
Depth
1-1/4" 3/4"
1" 1/2"
Front of Fireplace
Right Nailing Flange
Standoff Deflector
Top Nailing Flange
Flush
1/4"
Setting