Table of Contents
Advertisement
maxfps_h265
description
Group: capability_image_c<0~(n-1)> n denotes the value of "capability_nvideoin"
NAME
basicsetting
wdrpro_mode
wdrpro_strength
wdrpro_supportlevel
A list of <Positive
0/7
Integer> and "-"
<string[128]>
0/7
VALUE
0, <positive integer>
0, 1, 2
0, 1
0, <positive integer>
Maximum fps which the device can encoded with
H.265 on resolutions in this video mode.
"-" means not support.
* One to one mapping to the resolution in
"resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter records the frame rate when
"videoin_c<n>_cmosfreq"=60 or
"videoin_c<n>_modulation"=ntsc
* Only available when 'h265' is listed in
"capability_videoin_codec".
Description about this mode.
SECURITY
DESCRIPTION
(get/set)
0/7
A 32-bits integer, each bit can be set
separately as follows:
Bit 0 => Supports Brightness or not.
Bit 1 => Supports Contrast or not.
Bit 2 => Supports Saturation or not.
Bit 3 => Supports Sharpness or not.
0/7
0: Non-support WDR Pro
1: Support WDR Pro
2: Support WDR Pro and WDR Pro II
0/7
0: Non-support tuning strength of
WDR Pro
1: Support tuning strength of WDR Pro
* If
"capability_image_c<n>_wdrpro"=1,
this may be either 0 or 1.
0/7
This contains a list of positive integers,
split by comma.
If "wdrpro_mode" =1, then the value
indicate the support strength level of
WDR Pro.
If "wdrpro_mode" =2, then the first
VIVOTEK
User's Manual - 231
Advertisement
Table of Contents
