Table of Contents
Advertisement
Add media
Add media
Click
to open the media setting window. You can specify the type of media that will be
sent when a trigger is activated. A total of 5 media settings can be configured. There are three choices
of media types available: Snapshot, Video Clip, and System log. Select the item to display the detailed
configuration options. You can configure either one or all of them.
Media type - Snapshot
Select to send snapshots when a trigger is activated.
■ Media name: Enter a name for the media setting.
■ Source: Select to take snapshots from any of the video streams.
■ Send
pre-event images
The Network Camera has a buffer to temporarily hold data up to a certain limit. Enter a number to
decide how many images to capture before a trigger is activated. Up to 7 images can be generated.
■ Send
post-event images
Enter a number to decide how many images to capture after a trigger is activated. Up to 7 images can
be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15
images can be generated after a trigger is activated.
■ File name prefix
Enter the text that will be appended to the front of the file name.
1 pic.
2 pic.
3 pic.
4 pic.
5 pic.
6 pic.
7 pic.
Trigger Activation
8 pic.
9 pic.
10 pic.
11 pic. 10 pic.
12 pic. 13 pic.
14 pic.
VIVOTEK
15 pic.
User's Manual - 109
Advertisement
Table of Contents
