5 Operation
5.1 Getting started
The very first step is to establish a power connection using the mains plug. You should
first adjust the dimmer to a low level, so that when you look through the eyepiece for
the first time, your eyes are not immediately subject to a high level of light. You can
now switch on the lighting using the main switch.
The next step is to place an object holder with the sample on the specimen stage.
For the models of the OCM-1 series you can fixate the samples on the stage with help
of one of the available object holders (also see section 4.3 Specimen stage).
For the models of the OCM-1 series you can fixate the samples on the stage with help
of the object holder.
OCM-1-BA-e-2211
14