Gap Between The Main Unit And The Toilet Lid - Toto washlet C100 SW2034 Instruction Manual

Gap between the Main Unit and the Toilet Lid

The toilet lid can be removed for thorough
cleaning.
Unplug the power
1
plug.
Remove the toilet lid.
2
:Pull the left side outward.
: Disconnect the hinge from the recess
and pull up.
:Disconnect the right side.
Wipe with a soft cloth that
3
has been soaked in water
and wrung-out thoroughly.
Reinstall the toilet lid.
4
:Join the pin and the hinge on the right side.
Slightly tilt the toilet lid to the front.
:While pulling out the left side,
:Mount by joining the hinge with the recess.
* Be careful not to pinch your fi ngers.
Open and close the toilet lid
5
to check the mounting, and
then mount the main unit.
Insert the power plug.
6
 The POWER LED lights up.
Soft cloth soaked in water
Removing and Reinstalling
Hold with both
hands
B
A
Recess
E
Hinge
(Perform monthly)
Toilet paper, etc.
(May cause damage.)
C
D
Hinge
Pin
27 27