Temperature Adjustment - Toto washlet C100 SW2034 Instruction Manual

Temperature Adjustment

Three different temperature levels (high / medium / low) and "OFF" setting can be made.
(When you want to adjust the drying air temperature)
Adjusting the temperature
1
Select a temperature button you want to set from
• The current temperature level appears.
2
Press the button selected in step
until a desired temperature level lights up.
OFF
The "DRYER"* cannot be turned "OFF".
<Setting complete>
Note
• If the button is not pressed for about 10 seconds, the temperature adjustment LED will go off, but the setting
will be retained.
If the temperature adjustment LED goes out before the setting is completed, start all over again at step 1.
• When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.
➞Is the energy saver set to "ON"? (Page 20)
18 Except SW2014
*
Displaying the temperature level of
the pressed button
Drying air temperature*
*
· · and press it.
The setting changes each time the button is pressed
LOW
OFF
Warm Water / Toilet Seat / Drying *
Toilet seat temperature
(When you want to adjust the toilet seat temperature)
Warm water temperature
(When you want to adjust the warm water temperature)
When temperature is set
Lit
1
repeatedly
MEDIUM
Lit
HIGH
Lit
Lit