Table of Contents
Advertisement
G
Caller ID Service
select the desired line by pressing
{LINE1} or {LINE2}.
Displayed symbols
L m and n indicate which line the caller
information was received from.
L If the same caller calls more than once, it
is displayed with the number of times the
caller called ("×2" to "×9"). Only the date
and time of the most recent call is
stored.
L A Q is displayed next to items which
have already been viewed or answered.
Editing a caller's phone number
before calling back
You can edit a phone number in the caller
list by removing its area code and/or the
long distance code "1".
Handset
1
{MENU} (F2) i G i {SELECT}
2
Select the desired item.
3
Press {EDIT} repeatedly until the
phone number is shown in the desired
format.
1 Local phone number
321-5555
Example:
2 Area code – Local phone number
555-321-5555
Example:
3 1 – Area code – Local phone
number
1-555-321-5555
Example:
4
{C}
42
For assistance, please visit http://www.panasonic.com/phonehelp
1
2
3
Y
o
4
Caller ID number auto edit feature
Once you call back an edited number, the
unit can automatically edit other incoming
phone numbers each time you receive a
call.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
call these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
item in the caller list, then call that number.
After that, phone numbers from that
caller's area code are edited automatically.
This feature can be turned on or off (page
74). The default setting is "On".
Note:
L Phone numbers from the 4 most recently
L If you move to another area, you can
Base unit
{MENU} i G i {SET}
Select the desired item.
Press {EDIT} repeatedly until the
phone number is shown in the desired
format.
1 Local phone number
321-5555
Example:
2 Area code – Local phone number
555-321-5555
Example:
3 1 – Area code – Local phone
number
1-555-321-5555
Example:
{SP-PHONE}
edited area codes are automatically
edited.
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the area
codes you want to edit once again.
Advertisement
Table of Contents
