Table of Contents
Advertisement
Problem
Too much foam in the
drum during the wash-
ing cycle.
After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.
After the check, activate the appliance. The programme continues from the point
of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.
CONSUMPTION VALUES
INTRODUCTION
See the web link www.theenergylabel.eu for detailed informa-
tion about Energy Label.
The QR code on the energy label supplied with the appliance pro-
vides a web link to the information related to the performance of
the appliance in the EU EPREL database. Keep the energy label
for reference together with the user manual and all other docu-
ments provided with this appliance.
It is also possible to find the same information in EPREL using the
link https://eprel.ec.europa.eu and the model name and prod-
uct number that you find on the rating plate of the appliance. Refer
to 'Product description' chapter for the position of the rating plate.
LEGEND
kg
Laundry load.
kWh
Energy consumption.
Litres
Water consumption.
%
Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is
the noise and the lower is the remaining moisture.
Values and programme duration may differ depending on different conditions (e.g. room tem-
perature, water temperature and pressure, load size and type of laundry, supply voltage) and
also if you change the default setting of a programme.
28
•
Reduce the quantity of detergent.
•
Make sure that the flap is in the correct position (UP for powder deter-
gent - DOWN for liquid detergent).
•
Make sure you have used the detergent dispenser according the indi-
cations given in this user manual.
Possible solution
hh:m
Programme duration.
m
°C
Temperature in the laundry.
rpm
Spin speed.
Advertisement
Table of Contents
