Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWF142E3PW
Summary of Contents for Zanussi ZWF142E3PW
- Page 1 User Manual GETTING STARTED? EASY. ZWF142E3PW EN User Manual Washing Machine...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: General Safety
GENERAL SAFETY This appliance is for washing domestic-type, machine-washable • laundry only. This appliance is designed for single household domestic use • in an indoor environment. This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS INSTALLATION • Make sure not to cause damage to the mains plug and to the mains cable. Should the mains The installation must comply with cable need to be replaced, this must be carried relevant national regulations. out by our Authorised Service Centre. •... -
Page 5: Product Description
• Do not touch the glass door while a programme professional repairers, and that not all spare operates. The glass can get hot. parts are relevant for all models. • Make sure that all metal objects are removed • Concerning the lamp(s) inside this product and from the laundry. -
Page 6: Technical Data
Control panel Inlet hose connection Door handle Mains cable Rating plate Transit bolts Feet for levelling the appliance Hose support Drain hose The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D). Mod. -
Page 7: Information For Installation
UNPACKING WARNING! It is possible to see water flowing from the drain hose. 1. Open the door. Remove all the items from the This is because the washing drum. machine has been tested at the factory. 4. Remove the three transit bolts and pull out the plastic spacers. - Page 8 CAUTION! Make sure there is no damage to hoses and there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for a replacement inlet hose. 1. Connect the water inlet hose to the back of the 2.
-
Page 9: Installation On Suspended Flooring
INSTALLATION ON SUSPENDED FLOORING Suspended wooden floors are particularly susceptible to vibration. To limit vibration we recommend placing a The end of the drain hose must always waterproof wooden panel, at least 15 mm thick, be ventilated , i.e. the inner diameter of under the appliance. -
Page 10: Stacking Kit
FIXING PLATE KIT If you install the appliance on a plinth that is not an accessory supplied by ZANUSSI, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. -
Page 11: Control Panel Description
CONTROL PANEL DESCRIPTION Programme dial Spin reduction options touch button Display • No Spin option Delay Start touch button • Rinse Hold option FlexiTime touch button • Night option Temp. touch button Start/Pause touch button ON/OFF push button Easy Iron touch button Extra Rinse touch button Prewash touch button DISPLAY... -
Page 12: Dial And Buttons
Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. FlexiTime bars level indicator. Drum clean indicator. Child safety lock indicator. Add garments indicator. -
Page 13: Permanent Extra Rinse
regularly to reduce creasing. You must drain the The display shows the indicator and the water to unlock the door. selected delay time. After touching the Start/Pause As the programme is very quiet, it is suitable for button, the appliance begins the countdown use at night time when cheaper electricity tariffs and the door is locked. -
Page 14: Programme Chart
PROGRAMMES PROGRAMME CHART Reference spin Programme speed Programme description Default temperature Maximum load Spin speed (Type of load and level of soiling) Temperature range range Eco 40-60 1400 rpm 10 kg White cotton and fast-coloured cotton. (1400- 800 Normally soiled items. The energy consump- 40 °C rpm) tion decreases and the time of the washing... - Page 15 Reference spin Programme speed Programme description Default temperature Maximum load Spin speed (Type of load and level of soiling) Temperature range range 1400 rpm 10 kg White cotton items. This programme removes CleanBoost (1400- 800 micro-organisms thanks to a washing phase 60 °C rpm) with the temperature maintained above 60°C...
- Page 16 Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ Wool ■ ■ ■ ■ ■ ■ ■ Denim ■...
-
Page 17: Acoustic Signals
Liquid for col- Delicates Programme Liquid Universal Special Universal powder oureds woollens ▲ ▲ 14min Refresh ▲ ▲ 30min Rapid ▲ ▲ ▲ 60min EasyWash 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended SETTINGS ACOUSTIC SIGNALS... -
Page 18: Check The Position Of The Detergent Flap
3. Put the laundry in the drum, one item at a time. Always follow the instructions that you Do not put too much laundry in the drum. find on the packaging of the detergent 4. Close the door firmly. products, but we recommend that you do not exceed the maximum indicated level ( ). -
Page 19: Starting A Programme With The Delay Start
STARTING A PROGRAMME Touch the Start/Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn't flash (e.g. programme dial on a wrong position). The related indicator stops flashing and stays on. The programme starts, the door is locked. -
Page 20: Interrupting A Programme And Changing The Options
programme duration. During this phase the While a programme or the delay start operates, the appliance door is locked. The display shows the FlexiTime bars placed below the time digits play a simple animation. indicator 2. After about 15-20 minutes the Time Manager 1. -
Page 21: Stand-By Option
STAND-BY OPTION • The time area shows and the display The Stand-by function automatically deactivates the shows the door locked appliance to reduce the energy consumption when: • The drum still turns at regular intervals to • You do not use the appliance for 5 minutes prevent creases in the laundry. - Page 22 STUBBORN STAINS • the wash load to turn grey, • greasy clothes, For some stains, water and detergent is not • mould in the appliance. sufficient. Excessive detergent may cause: We recommend that you pre-treat these stains • sudsing, before you put the items in the appliance. •...
- Page 23 With some problems, the display shows an alarm code and the Start/ Pause button may flash continuously: Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this The appliance does not information, contact your local water authority.
- Page 24 Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
-
Page 25: Care And Cleaning
Problem Possible solution After the washing cycle, • Make sure that the flap is in the correct position (UP for powder deter- there are some deter- gent - DOWN for liquid detergent). gent residues in the dis- • Make sure you have used the detergent dispenser according the indi- penser drawer. -
Page 26: Door Seal With Double Lip Trap
the inner part of the appliance, run a maintenance Occasionally, at the end of a cycle the wash regularly (at least once a month). display may show the icon : this is a recommendation to perform the “drum Refer to "Cleaning the drum" cleaning”. -
Page 27: Cleaning The Inlet Hose And The Valve Filter
4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° EMERGENCY DRAIN 1. Disconnect the mains plug from the mains socket. -
Page 28: Consumption Values
WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. CONSUMPTION VALUES INTRODUCTION See the web link www.theenergylabel.eu for detailed informa- tion about Energy Label. The QR code on the energy label supplied with the appliance pro- vides a web link to the product information sheet. -
Page 29: Troubleshooting
Power consumption in different modes Off (W) Stand-by (W) Delay start (W) 0.50 0.50 4.00 Time to Off/Standby mode is 15 minutes maximum. COMMON PROGRAMMES These values are indicative only. Programme Litres hh:mm °C Cottons 3.35 95.0 4:00 52.00 1400 90°C Cottons 2.05... - Page 32 WWW.ZANUSSI.COM/SHOP...