Table of Contents
Advertisement
A
B
C
D
E
F
G
DIAL AND BUTTONS
INTRODUCTION
The options/functions are not available
with all washing programmes. Check
the compatibility between options/
functions and washing programmes in
the "Programme Chart". An option/
function can exclude another one, in
this case the appliance doesn't allow
you to set incompatible options/
functions.
ON/OFF
Press this button for a few seconds to activate or
deactivate the appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically deactivates
the appliance after several minutes to reduce the
energy consumption, you may need to activate the
appliance again.
For more details, refer to Stand-by paragraph in
Daily Use chapter.
TEMP. ºC
When you select a washing programme, the
appliance automatically proposes a default
temperature.
The indicator Frio
The indicator of the set temperature comes on.
12
Door locked indicator.
Delay start indicator.
The digital indicator can show:
•
Programme duration (e. g.
•
Delay time (e. g.
•
Cycle end (
•
Warning code (e.g.
Flexi Time bars level indicator.
Drum clean indicator.
Child safety lock indicator.
Add garments indicator. Illuminates at the beginning of the Wash
phase, while the user can still pause the appliance and add more
laundry.
= cold water.
).
).
).
).
CENTRIF.
When you set a programme, the appliance
automatically sets the maximum spin speed allowed
except programme Denim.
Additional spin options:
•
No Spin
. The related indicator comes on.
Set this option to deactivate all spin phases. The
appliance performs only the draining phase of
the selected washing programme. Set this
option for very delicate fabrics. The rinse phase
uses more water for some washing programmes
•
Rinse Hold
. The related indicator comes
on.
The final spin is not performed. The water of the
last rinse is not drained out to prevent the
fabrics from creasing. The washing programme
ends with water in the drum.
The door stays locked and the drum turns
regularly to reduce creasing. You must drain the
water to unlock the door.
If you touch the Inicio/Pausa
appliance performs the spinning phase and
drains the water.
•
Night
. The related indicator comes on.
The intermediate and the final spinning phases
are suppressed and the programme ends with
water in the drum. This helps to reduce
creasing. The door stays locked. The drum turns
button, the
Advertisement
Table of Contents
