Remote Commands - Panasonic KX-TG4134M Operating Instructions Manual

Answering System
1
{MENU}(3)6
2
Enter the desired 3-digit remote access
code.
3
{SAVE} s {OFF}
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 31.
L The entered remote access code is deleted.
Using the answering system
remotely
1
Dial your phone number from a touch-
tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Follow the voice guidance prompts as
necessary or control the unit using remote
commands (page 32).
4
When finished, hang up.
Voice guidance
■ When the English voice guidance is
selected
During remote operation, the unit's voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
■ When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 32).
Note:
L If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
32 For assistance, please visit http://www.panasonic.com/help

Remote commands

You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1
Repeat message
(during playback)
2
Skip message
(during playback)
4
Play new messages
5
Play all messages
9
Stop playback
Start voice guidance
)
Turn answering system off
*4
Erase currently playing
message
*5
Erase all messages
*(
End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
Dial your phone number from a touch-
tone phone.
2
Let the phone ring 15 times.
L A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
L The greeting message is played back.
L You can either hang up, or enter your
remote access code again and begin
remote operation (page 31).
*1
*2
*3