Table of Contents
Advertisement
TG6511-6521HG(e-hg).book Page 37 Friday, January 22, 2010 2:49 PM
unauthorised parties from listening to your
messages remotely.
Fontos:
L In order to operate the answering system
remotely, you must first set a remote
access code.
1
8 i {#}{3}{0}{6}
2
To turn on remote operation, enter the
desired 3-digit remote access code.
3
M i {ic}
Deactivating remote operation
Press {*} in step 2 on „Remote access
code", 36. oldal.
L The entered remote access code is
deleted.
Using the answering system
remotely
1
Dial your phone number from a touch-
tone phone.
2
After the greeting message starts, enter
your remote access code.
L The unit announces the number of
new messages.
3
Press {9} to start voice guidance.
4
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (37. oldal).
5
When finished, hang up.
Megjegyzés:
L You can also leave a message just as any
outside caller can. After the greeting
message starts, press {*} to skip the
greeting message and record your
message after the beep.
Remote commands
Remote commands are presented by voice
guidance in the following order:
Key
Operation
Repeat message
{1}
(during playback)
Skip message
{2}
(during playback)
Key
{4}
{5}
{6}
{7}
{9}
{0}
{*}{4}
{*}{5}
{*}{6}
{*}{#}
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 This command is not included in voice
guidance.
*3 To repeat the voice guidance, press {9}
again.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
Dial your phone number from a touch-
tone phone.
2
Let the phone ring 10 times.
L A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
L The greeting message is played back.
L You can either hang up, or enter your
remote access code again and begin
remote operation (36. oldal).
*1
Answering System
Operation
Play new messages
Play all messages
*2
Play greeting message
Record greeting message
Repeat the voice guidance
*3
(playback or recording
is
stopped)
Turn answering system off
Erase currently playing
message
Erase all messages
Reset to a pre-recorded
greeting message (during
greeting message
*2
playback)
End remote operation
*2
(or hang up)
37
Advertisement
Table of Contents
