Epson SureColor SC-P8500DM Series User Manual page 33

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Item
I
ICC Profile
J
PS unit print settings
Ink Density
ICC Profile
K
Roll Core Diameter
L
Paper Feed Offset
M
Paper Size Check
N
Lateral Feed Adjustment
O
Margins
See the following for details on making settings other than the above.
"Paper Setting" on page 138
U
Introducing the Software
Function
Click Browse to change the ICC profile. You can set RGB Profile and CMYK Profile.
❏
When printing using the printer driver, set RGB Profile.
❏
When printing using a software RIP, set the color mode profile that is
supported by your RIP to either RGB Profile or CMYK Profile.
®
Displayed when the Adobe
print settings when using the Adobe
Set the ink density for printing using the PS Folder. When printing from the
™
® ®
Adobe PostScript 3 expansion unit without using the PS Folder, the ink
density set in the PS printer driver is applied.
See the following for details on the PS Folder.
™
® ®
U "Adobe PostScript 3
Set the ICC profile when printing from the Adobe
Select one of the following.
❏
Use the same profile as the printer driver
The profile set as the RGB Profile for the ICC Profile (I) is used as the ICC
profile when printing from the Adobe
cannot be selected if the RGB Profile is blank, so set the RGB Profile first.
❏
Set the profile for PS unit
Select this when the CMYK profile is used as the ICC profile when printing from
® ®
the Adobe PostScript
Set the paper core size for the roll paper being loaded.
Optimizes the paper feed when printing. By adjusting the gap between the data
size and the print size, you can reduce the chance of banding (horizontal banding)
or uneven colors.
Example of entering settings
When printing at a data size of 100 mm and a print size of 101 mm, the offset is
1.0%. Therefore, you would enter a value of -1.0%.
Select this to automatically detect the width of the loaded paper.
Select this to correct differences in the left or right of the paper feed. The printer
does not support this function.
If the margin at the leading edge of the paper is small, colors may be uneven
depending on the paper and printing environment. If this occurs, print a larger
margin at the leading edge of the paper.
33
™
®
PostScript 3 expansion unit is installed. Sets the
™
® ®
PostScript 3 expansion unit.
Expansion Unit User's Guide"
®
PostScript
® ®
PostScript 3
™
3 expansion unit. Click Browse to set the profile.
™
®
3 extension unit.
™
expansion unit. This