Epson SureColor SC-P8500DM Series User Manual page 153

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Item
PS Menu (Except for models without the Adobe PS3 Expansion Unit)
Version
CMYK Simulation
RGB Source
Rendering Intent
Black Point Compensation
Preserve Black
Auto Rotate
PS Error Sheet
Optimize Edge Quality
PDF Rendering Level
PDF Overprint Simulation
Clear All Settings
Menu List
Setting/Additional Explanation
Displays the PostScript/PDF version.
You can select the CMYK ink color you want to simulate when reproducing
CMYK ink colors for an offset printer.
When printing RGB data, you can select the RGB color definition you want
to simulate.
You can select how to convert the color space when performing absolute
colorimetric, relative colorimetric, perceptual, saturation CMYK simulation,
and RGM simulation.
On, Off
Normally, select On. Select "Off" if you feel shadows are too light when
converting from a wide color space to a narrow color space.
On, Off
Set to On to print the K-axis area using black ink when printing CMYK
images.
On, Off
Set to On to automatically rotate print data 90˚ to the right depending on
the paper width, data size, and other conditions.
On, Off
Set to On to print the contents of the error when a PostScript error occurs.
On, Off
Set to On to improve the image quality at the edges.
Level 1 - 3
Normally, this is set to 3. Creates a PS that reproduces the PDF as closely as
possible, but may not be printable. If this occurs, try lowering the
rendering level.
On, Off
Set to On to print the image using transparent colors when printing an
image with overprint settings.
Restores the PS settings to their default settings.
153