Epson SureColor SC-P8500DM Series User Manual page 151

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Item
Advanced Paper Settings
Confirm ICC profile
(Except for models without the
Adobe PS3 Expansion Unit)
Confirm Color Density
(Except for models without the
Adobe PS3 Expansion Unit)
Paper Thickness
Platen Gap
Top/Bottom Margins
Paper Suction
Paper Size Check
Auto Cut
Roll Core Diameter
Paper Eject Roller
Paper Feed Offset
Delete
Auto Cleaning
On
Standard
Custom
Nozzle Check Schedule
Nozzle Check Sensitivity
Nozzle Check Result Notice
Off
Menu List
Setting/Additional Explanation
The ICC profile name is displayed when using paper with custom paper
settings.
The ink density is displayed when using paper with custom paper settings.
The ink density cannot be changed.
0.01 - 1.50 mm (0.4 - 59.1 mil) (0.01 mm units)
Auto, 1.2, 1.6, 1.9, 2.1, 2.4
Standard, Top 3 mm/Bottom 3 mm, Top 15 mm/Bottom 15 mm, Top 20
mm/Bottom 15 mm, Top 45 mm/Bottom 15 mm
When you select Standard, the margins are set automatically according to
the paper.
Roll 1 (known as Roll on the SC-P6500E Series/SC-T3700E Series), Roll 2, Cut
Sheet, Poster Board
-3 - +3
Thin or soft paper may not be fed correctly. If this occurs, reduce the
setting.
On, Off
When this is set to On, the width of the loaded paper is automatically
detected.
Follow Paper Source Settings, Never Cut
2inch, 3inch
Set the paper core size for the roll paper being loaded.
Auto, Use, Do Not Use
Roll 1 (known as Roll on the SC-P6500E Series/SC-T3700E Series), Roll 2, Cut
Sheet, Poster Board
-1.0 - +1.50%
Deletes the registered custom paper setting.
Sets the timing that you want the printer to check the status of the nozzles,
and if clogged nozzles are detected, cleans the nozzles up to the set
number of times. If the nozzles are not clogged, cleaning is not performed.
Sets normal automatic cleaning.
You can set the timing and frequency for auto cleaning.
During Print, After Print
You can set the sensitivity of the nozzle check and the maximum number
of cleaning cycles.
On, Off
Turns off auto cleaning.
151