Table of Contents
Advertisement
3
Enter a name, up to 15 characters, with the
dialing buttons,
≥See the steps for entering names and symbols
(p. 46).
≥If a name is not required, press (›) (Next
key) and go to step 5.
(›)
4
Press
(Next key).
5
Enter a phone number, up to 22 digits.
≥Each time you press
(CLEAR/INTERCOM/HOLD), a digit is erased.
To erase all of the digits, press and hold
(CLEAR/INTERCOM/HOLD).
≥To move the cursor, press (fi) or (fl).
(›)
6
Press
(Next key).
≥If you want to change the storing name or
number, press (‹) (Edit key) repeatedly to
reach the desired display and change it.
(fl)
7
Press
(Save key).
≥A beep sounds.
≥To continue storing other items, repeat from
step 2.
≥To exit the programming mode, press (OFF).
≥If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 58) in step 5.
≥You can exit the programming mode any time by pressing (OFF).
≥If the display shows "Directory full" in step 2, the display will return to
step 1. Press (OFF) to exit the list. To erase other stored items from the
directory, see page 51.
≥After the maximum of 50 items has been stored, "Directory full" is also
displayed.
≥If an alarm tone sounds in step 7, the item cannot be stored in the directory.
Press (OFF) and try again from step 1.
For assistance, please call: 1-800-211-PANA(7262)
(fi)
(fl)
or
.
Enter name
=Next
21
4
Enter name
Tom Jones
=Next
21
4
Enter phone no.
0987654321
=Next
21
4
Tom Jones
098-765-4321
=Edit
1=Save
3
Tom Jones
098-765-4321
"
45
Hide quick links:
Advertisement
Table of Contents
