Settings
Connections
Base unit
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Cord
≥USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z).
≥The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
≥Use only a Panasonic Handset for the KX-TG2584S.
≥To connect a standard telephone on the same line, see page 78.
≥If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
10
Raise the antennas.
Fasten the AC adaptor cord to
prevent it from being disconnected.
Handset Cord
Hook
Handset