Table of Contents
Advertisement
SYMPTOM
31. During recording, sound
cannot be heard.
32. Play, Rewind and Fast-
Forward functions do not
work.
33. The tape is moving, but
there is no picture.
34. The LCD monitor image is
distorted.
35. Images on the LCD
monitor are jittery.
36. Blocks of noise appear
during playback, or there is
no playback picture and
the screen becomes blue.
37. The LCD monitor, the
viewfinder and the lens
have become dirty (ex.
fingerprints).
38. An unusual mark appears.
Downloaded from:
31. •This is normal.
32. •The Power Switch is not set
33. •Your TV has AV input
•The cassette holder cover is
34. •During playback of the
35. •The speaker volume is too
36.
37.
38.
https://www.usersmanualguide.com/
POSSIBLE CAUSES
to "
".
terminals, but is not set to its
VIDEO mode.
open.
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
great.
————
————
————
CORRECTIVE ACTION
31.
————
32. •Set the Power Switch to
"
" (
pg. 29).
33. •Set the TV to the mode
or channel appropriate
for video playback
(
pg. 32, 33).
•Close the cassette holder
cover (
pg. 10).
34.
————
35. •Turn the speaker volume
down (
pg. 29).
36. •Clean the video heads with
an optional cleaning
cassette (
pg. 64).
37. •Wipe them gently with soft
cloth. Wiping strongly can
cause damage (
38. •Check the section of the
manual that explains LCD
monitor/viewfinder
indications (
pg. 57 – 59).
CONTINUED ON NEXT PAGE
55
EN
pg. 62).
Advertisement
Table of Contents
