Intercom - Panasonic KX-TG2258 Operating Instructions Manual

Intercom

Handset
A 2-way intercom can be set up between the base unit and the handset.
Paging the base unit from
the handset
1
Handset:
Press [MENU].
2
Handset:
Scroll to "Intercom" by
pressing
[ ]
Select.
3
Base unit:
When the other party's voice is
heard after the beeps, answer
using the MIC.
• The IN USE/CHARGE indicator
lights.
4
To disconnect the intercom,
press [OFF] on the handset.
OR
Press [LOCATOR/
INTERCOM] on the base unit.
• The IN USE/CHARGE indicator
goes out.
During an intercom call:
• If the handset user has difficulty hearing the base unit user, decrease the base
unit speaker volume by pressing VOLUME [ ].
• If noise interferes with the conversation, press CH while "CH" is shown on the
handset display. The unit selects a clearer channel.
• If an incoming call is being received, the intercom call stops and the unit starts
to ring. To answer, press [
38
Base Unit
or , then press
[ ]
], [
Paging the handset from
the base unit (Handset
locator)
Using this feature, you can also locate
the misplaced handset.
1
Base unit:
Press [LOCATOR/
INTERCOM].
• The handset beeps for 1 minute
and displays "Paging".
• The Ringer and IN USE/
CHARGE indicators flash.
• To stop paging, press
[LOCATOR/INTERCOM] on the
base unit.
2
Handset:
Press Intercom to answer.
• The handset displays
"Intercom".
3
Base unit:
Talk into the MIC.
4
To disconnect the intercom,
press [OFF] on the handset.
OR
Press [LOCATOR/
INTERCOM] on the base unit.
• The IN USE/CHARGE indicator
goes out.
• If you do not want to answer the page
in step 2, press [OFF] to stop paging.
] or [SP-PHONE].