Table of Contents
Advertisement
2. Specification
BCZ3205DL / BCZ3205DW
Overall size (L x W x H) ................................ 1860 x 395 x 325 / 1860 x 610 x 520 mm
Dry weight .................................................................................................. 6.1 / 6.4 kg
Engine
Model ............................................................................................ Zenoah GZ30N
Displacement ........................................................................................... 29.5 cm
Fuel ............................................................................ Mixture (Gasoline 50 : Oil 1)
Carburetor .................................................................................... Diaphragm type
Ignition system ........................................... Transistor controlled flywheel magneto
Spark plug ..................................................................................... NGK CMR7H-10
Fuel tank capacity ............................................................................................... 0.72 L
Starter ...................................................................................................... Recoil starter
Clutch .................................................................................................. Centrifugal type
Reduction ratio .................................................................................................... 1.462
Cutting head rotating direction ............................. Counter-clockwise (Operator view)
Specifications are subject to change without notice.
3. Warning labels on the machine
(1)
(2)
(1) Read owner's manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
(when using ZENOAH genuine oil)
(3)
(4)
(5)
3
(6)
(7)
Never modify your machine.
We won't warrant the machine, if you use the
remodeled brushcutter or if you don't observe
the proper usage written in the manual.
The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
BCZ3205DL / BCZ3205DW
GB-5
G
B
Advertisement
Table of Contents
