Instructions For The Installer; Precautions; Preliminary Operations; Place Of Installation - Smeg K4610X Instruction Booklet

Table of Contents

Instructions for the installer

Read the instructions booklet carefully before installing and starting up the appliance. All

installation, assembly, servicing and extraordinary maintenance must be carried out by

qualified personnel who have the necessary professional requisites (authorised by the

manufacturer or dealer) and in accordance with current regulations regarding product and

workplace safety in the country of installation. Incorrect installation, servicing,

maintenance, cleaning and any tampering or modifications can cause malfunctions, damage

and injury. The function of this appliance is to extract the steam emitted from the oven's

steam outlet and steam that escapes when the oven door is opened. Any other use is

considered improper and therefore dangerous. This appliance is intended for commercial

use, for example in kitchens of restaurants, canteens or hospitals and in commercial

enterprises such as bakeries, butcher shops etc. but not for the continuous mass production

of food. Take special care when there are other appliances that use an open flame in the

same room in order to prevent the backflow of combustion gases. Do not flambé foods

under the extractor hood.

On receipt of the appliance, make sure it has not been damaged during transport and that

the packaging has not been tampered with. In the case of damage or missing parts, inform

the carrier and dealer / manufacturer immediately, indicating the Model and the Serial

Number and attach a photo.

Make sure that doors, corridors and passageways are kept clear in order to allow access to

the place of installation.

WARNING: the appliance could tip over when being moved and may break or cause damage

to things and people. Use suitable handling equipment, also taking into account the weight

of the appliance.

The appliance must be installed indoors in well-ventilated rooms (not outdoors). Before

positioning the appliance, check the overall dimensions and the exact position of the

electrical and water connections. Position the appliance so that the back is easily accessible

to allow electrical and water connections to be made and maintenance to be carried out. Do

not place the appliance near to flammable materials or containers of inflammable materials

(such as walls, furniture, partitions, gas cylinders) as it can cause a fire hazard. If this is not

possible, cover the flammable parts with heatproof non-flammable insulation materials,

paying close attention to fire prevention regulations.

6 6

Table of Contents