Removing The Carrier Assembly From The Heatsink - Supermicro SuperServer 621H-TN12R User Manual

Removing the Carrier Assembly from the Heatsink

To remove the processor carrier assembly from the PHM, follow these steps:
1. Detach the four plastic clips (marked a, b, c, d) on the processor carrier assembly from
the four corners of the heatsink (marked A, B, C, D) as shown below.
2. When all plastic clips have been detached from the heatsink, remove the processor
carrier assembly from the heatsink
Chapter 3: Maintenance and Component Installation
c
Pin 1
a
C
A
46
b
d
B
D