Protekt P-10R NIZE Instruction Manual

there are many hazards that may affect the performance of the equipment and corresponding safety precautions that have to be observed during equipment utilization, especially:
- trailing or looping of lanyards or lifelines over sharp edges,
- any defects like cutting, abrasion, corrosion,
- climatic exposure,
- pendulum falls,
- extremes of temperature,
- chemical reagents,
- electrical conductivity.
personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or foil bag or cases made of steel or plastic) to protect it against damage or moisture.
the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the equipment. For textile products use mild detergents for delicate fabrics, wash by hand or in a
machine and rinse in water. Plastic parts can be cleaned only with water. When the equipment becomes wet, either from being in use or when due cleaning, it shall be allowed to dry naturally, and shall
be kept away from direct heat. In metallic products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of the equipment.
personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, ultraviolet degradation, damp environment, sharp edges, extreme temperatures and
corrosive or aggressive substances.
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
IDENTITY CARD
MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
SERIAL NUMBER
USER NAME
DATE OF PURCHASE
PERIODIC EXAMINATION AND REPAIR HISTORY
REASON FOR
DATE
ENTRY PERIODIC EXAMINATION REPAIRS CARRIED OUT
OR REPAIR AND OTHER REVELANT INFORMATIONS
1
2
3
4
APAVE SUDEUROPE SAS, BP 3 - 33370 ARTIGUES près BORDEAUX France, no. 0082
EC type examination carried out by
PROTEKT, 93-403 LODZ, ul. Starorudzka 9, POLAND, TEL: (48 42) 680 20 83, FAX:
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DEFECTS NOTED, NAME AND SIGNATURE
OF COMPETENT PERSON
(48 42) 680 20 93, www.protekt.com.pl
Instruction Manual
READ CAREFULLY BEFORE USE
Safety harness is basic fall arrest equipment complied with EN 361. It is
also destinated to be used as a rescue harness complied with EN 1497.
Maximum load of the rescue harness is 100 kg.
DESCRIPTION
Full body harness P-10R is made of
webbing which is sewn and connected by metal buckles. Harness P-10R
is equipped with webbing loop for rescue equipment.
This configuration guarantees full safety and comfort work.
BASIC EQUIPMENT
back attaching buckle - for attaching fall arrest systems
back attaching buckle - for attaching fall arrest systems
loop for attaching rescue equipment
connecting and adjusting buckles - for comfort wearing and using of
harness
front attaching buckle - for fall arrest sysytems
rescue acces loop - for rescue equipment only
SIZES
The harness P-10R is manufactured in two sizes:
- universal: M-XL
ADMISSIBLE TIME OF USE
Safety harness can be used for 5 years counting from a date of putting
the harness into operation. After this period the harness
withdrawn from use to carry out
The manufacturer's inspection can be carried out by:
- manufacturer
- or person recommended by manufacturer
- or company recommended by manufacturer.
During this inspection will be established admissible time of harness use
till next manufacturer's inspection.
The harness must be withdrawn from use immediately and destroyed
when it has been used to arrest a fall.
CONTENT OF HARNESS IDENTITY LABEL
trade mark of the device
type of the device
PERIODIC
reference number
EXAMINATION
NEXT DUE DATE
size
month/year of the device manufacture
number of the manufacturing series
number / year of the European standards
the equipment conform
CE marki n g and number of a not i f i e d body
cont r ol l i n g manufact u ri n g of t h e equi p ment (art . 11)
caution: read the manual
marking of the manufacturer
or distributor
THE EQUIPMENT
SAFETY
EN 361:2002
HARNESS
EN 1497:2007 Ref.: AB 110 03
polyamide/polyester 44mm wide
back attaching
buckle for attaching
fall arrest system
must be
shoulder strap
manufacturer's detailed inspection .
connecting
and adjusting
buckle
of the chest
strap
P-10R NIZE
SAFETY HARNESS
Ref. AB 110 03
Size: M-XL
XXL
Date
of manufacture: 03/2003
connecting
Serial
and adjusting
number: 0000001
buckle
EN 361:2002 EN 1497:2007
of the thigh strap
P-10R NIZE
loop
for attaching
rescue
equipment only
do not use it
with fall arrest
equipment
front attaching
buckle for attaching
fall arrest system
adjusting
buckle
of the shoulder
strap
thigh strap