Advertisement
REPLACING THE MOUNTING BASE
1. Loosen and remove the tensioner
collar from the ball/socket assembly
and remove the ball end of the magnetic
mount from the socket on the mounting
base. Note: Do not remove the collar
from around the ball end.
2. Place the ball end of the magnetic
mount against the socket of the new
mounting base. Thread the collar onto
the base and retighten. DO NOT
OVERTIGHTEN.
INSTALLING THE DASH MOUNT
For complete warranty details, please visit us at www.scosche.com or call (800) 363-4490
0
Clean the dash surface with supplied cleaning wipe•.
*Note: Wipe may cause discoloration of certain plastics,
vinyls and painted surfaces. It is recommended to test in
an inconspicuous area first.
Peel the adhesive
backing from the bottom
of the mounting base,
and place in position.
Apply firm pressure.
Loosen, then re-tighten the base
to adjust for optimum viewing angle.
2
Advertisement
