Register your product online at
� SCDSCI-IE"
REPLACEMENT MOUNTING BASE 2-PACK
FOR MAGICMOUNT" PRO DASH
A. (2) Low-profile adhesive mounting bases
Note: Replacement bases for MAGICMOUNT
DASH
PRO
(MPD-BP0)
threaded ball-joint assembly (magnetic mount
and ball-joint tensioner collar not included).
B. (2) Cleaning wipes
Questions?
�
Need help with your Product?
I..
Call Customer Service at:
..i11111
(BOO) 363-4490 x1
REMOVING THE DASH MOUNT
OPTION 1
1. Using a household hair-dryer, apply
LOW heat to the base of the dash
mount for 2-3 minutes. To avoid
damage to the dash surface, make
sure to hold the hair-dryer at
least 6-9" away from the dash.
2. Gently pull the dash mount away from the dash.
3. Apply household adhesive remover (such as
Goo-Off) for any remaining adhesive residue.
©2019 SCOSCHE INDUSTRIES, INC.
www.scosche.com/register
PARTS INCLUDED
magnetic mount with
OPTION 2
1. Wrap dental floss behind the base.
2. Gently pull the floss back and forth to slice through
3. Apply household adhesive remover (such as
MPDBASE-2PKBP0
the adhesive layer, until the mount is detached from
the dashboard,
Goo-Off) for any remaining adhesive residue.
SI 300MPDBASE-2PKBP0