Table of Contents
Advertisement
Parameter
Memory RAS Configuration
(Note) Advanced items prompt when this item is defined.
Description
Press [Enter] to configure advanced items.
Mirror Mode
(Note)
Š
– Mirror Mode will set entire 1LM memory in system to be
mirrored, consequently reducing the memory capacity by half.
Enables the Mirror Mode will disable the XPT Prefetch.
– Options available: Disabled, Full Mirror Mode, Partial Mirror
Mode. Default setting is Disabled.
Partial Mirror 1 Size (GB)
Š
– Selects multiplier of 1GB for the size of the SAD to be created.
Memory Correctable Error Flood Policy
Š
– Options available: Disable, Once, Frequency. Default setting is
Frequency.
Correctable Error Threshold
Š
– Correctable Error Threshold (0x01-0x7fff) used for sparing, and
leaky bucket.
– Press the <+> / <-> keys to increase or decrease the desired
values.
Trigger SW Error Threshold
Š
– Enable/Disable Sparing trigger SW Error Match Threshold.
– Options available: Disabled, Enabled. Default setting is
Disabled.
SW Per Bank Threshold
Š
– SW Per Bank Threshold (1-0x7FFF) used for DDR bank level
error.
– Press the <+> / <-> keys to increase or decrease the desired
values.
SW Correctable Error Time Window
Š
– SW Correctable Error time window based interface in hour (0-24).
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket time window based interface
Š
– Enable/Disable leaky bucket time window based interface.
– Options available: Disabled, Enabled. Default setting is
Disabled.
Leaky bucket time window based interface Hour
Š
– Leaky bucket time window based interface hour used for DDR
(0-24).
– Press the <+> / <-> keys to increase or decrease the desired
values.
BIOS Setup
- 60 -
(Note)
Advertisement
Table of Contents
