Table of Contents
Advertisement
NLService
Slide the detergent drawer into the
4.
appliance.
13.8 Starting the program
Required:A program is set.
→ "Set program", page 30
onStart/Refillto press.
▶
aThe drum spins and finds one
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
aThe display shows the program
duration or the program end time.
aAfter program end it shows
display:End.
13.9 Change activated
program end time
You can change the set and changed
program end time several times
before you start the programme.
Requirements
¡The program is set.
→ "Set program", page 30
¡The program end time is set
and activated.
→ "Buttons", page 24
onStart/Refillto press.
1.
The activated program end time is
paused.
onReady in
2.
display the desired program end
time is shown.
onStart/Refillto press.
3.
The changed program end time is
activated.
32
press to it
13.10 Soak laundry
Remark:No additional detergent is
required. The soapy water is then used
for washing.
Start the program.
1.
To pause the program, press after
2.
approx. 10 minutesStart/ Refill.
To resume the program after the
3.
desired soaking time, press Start/
Refill.
13.11 Adding laundry
After the program has started, you
can remove or add the laundry
depending on the program status.
onStart/Refillto press.
1.
The device pauses.
Remark:If you want to add laundry,
follow the instructions on the
display.
→ "Display", page 23
Open the door.
2.
Add or remove the laundry.
3.
Close the door.
4.
onStart/Refillto press.
5.
13.12 Progr. Cancel
onStart/Refillto press.
1.
Open the door.
2.
At high temperature and high
water level, the door of the
appliance remains locked for safety
reasons.
– At a high temperature, start the
programmeTo rinse.
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→ "Programs", page 25
Advertisement
Table of Contents
