Siemens WU14UT20NL User Manual page 42

NLTroubleshooting
Malfunction
Symbol voltage
undershoot (dub-
bele point).
burns.
burns.
flashes.
All other error codes.
"E:30/-20"
Device not working.
Program does not start.
42
Cause and Troubleshooting
Voltage undershoot can cause program extension.
No solution possible.
Voltage undershoot can cause program extension.
No solution possible.
Temperature is too high.
Wait for the temperature to drop.
▶
→ "Program cancel", page 32
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", page 25
Door is not closed.
▶
Close the door.
Laundry is jammed in the door.
Remove trapped laundry.
▶
Malfunction
Please contact customer service.
▶
→
"After-sales service", Page 50
Solenoid valve defective.
Please contact customer service.
▶
→
"After-sales service", Page 50
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with the same load.
Additional water filled.
▶
Do not fill the appliance with additional water during
operation.
Mains plug of the power cable is not plugged in.
Connect the device to the power supply.
▶
The fuse in the fuse box has blown.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or other devices
▶
are working.
Start/Refillwas not pressed.
PressStart/Refill.
▶
Door is not closed.