NLCleaning and maintenance
Since there may still be residual
1.
water in the pump, carefully
unscrew the cover.
Large impurities can cause the
‒
filter element to become stuck in
the pump housing. Loosen
impurities and remove filter
element.
Clean the interior, the threads of the
2.
pump cover and the pump housing.
The pump cover consists of two
components that can be dismantled
for cleaning.
Verify that the pump impeller rotates
3.
easily.
38
Fit the pump cover.
4.
Check that the pump cover
‒
components are fitted correctly.
Tighten the pump cover up to the
5.
stop.
90°
The handle of the pump cover
must be vertical.
Before next wash
To prevent unused detergent from
flowing into the drain during the next
wash, run a suitable draining program
after emptying the pump.
Open the water tap.
1.
Insert the plug into the socket.
2.
Turn on the device.
3.
Pour one liter of water into
4.
compartment II.