Page 1
POWER TOOL INSTRUCTION & USER MANUAL 21-18BLDD Original Instructions IM-18BLDD-EN Iss: 06/2021...
Page 2
The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. 21-18BLDD Instruction & User Manual...
CHARGER TECHNICAL DATA NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits/Drills Power Switch Direction Selector Torque Setting Mode Selector Speed Control Maintenance Transport and Storage WARRANTY STATEMENT Terms and Conditions EU/UK DECLARATION OF CONFORMITY 21-18BLDD Instruction & User Manual...
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 21-18BLDD Instruction & User Manual...
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. 21-18BLDD Instruction & User Manual...
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. 21-18BLDD Instruction & User Manual...
Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. 21-18BLDD Instruction & User Manual...
To reduce risk of injury, only charge if they have been given supervision JCB rechargable batteries. The or instruction concerning use of charger and battery packs are specifically the appliance in a safe way and designed to work together.
BELT CLIP GEARBOX SPEED SELECTOR SWITCH CHARGER* ON/OFF TRIGGER BATTERY PACK* - PLEASE REFER TO FORWARD/REVERSE SELECTOR TABLE ON PAGE 11 FOR BATTERY INFORMATION SWITCH BATTERY TEST BUTTON AND AUTOMATIC LED LIGHT CHARGE INDICATOR* *If applicable 21-18BLDD Instruction & User Manual...
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE HAND-ARM vibration tool use across a number of days. VIBRATION SYNDROME IF USAGE IS NOT ADEQUATELY MANAGED. 21-18BLDD Instruction & User Manual...
Make sure the power switch is not pressed Charger is connected to in when inserting or replacing the battery. mains power Use with JCB batteries only: 21-20LI, 21- Connected battery is 30LI, 21-40LI, 21-50LI. charging Do not force the battery when Connected battery is fully connecting it, use moderate pressure.
Check that the chuck jaws rest on the flat surfaces of the accessory. Tighten the chuck until it grips the accessory. Grip the chuck firmly and turn it clockwise. 21-18BLDD Instruction & User Manual...
Check that the drill is correctly inserted rotation. and the chuck is properly tightened before Place the bit into the screw head in line with starting the tool. the screw. Otherwise the screw can be damaged. 21-18BLDD Instruction & User Manual...
Transport and Storage If the tool will remain unused for any length of time, it should be stored in the original packaging. Store the tool and battery in a dry, frost- free, well ventilated place. 21-18BLDD Instruction & User Manual...
Page 17
Ensure that the tool is not at risk of tipping over or exposed to excessive vibration and shocks during transport, especially if the tool will be transported by car or other vehicle. NOTE Operating temperature: 0-40 °C Storage temperature: 20-60 °C 21-18BLDD Instruction & User Manual...
Warranty cover commences from the date of purchase on the retail sales receipt and is valid only for JCB Tools products purchased within the UK bearing the CE and UKCA mark and a visible serial number.
Page 19
Repairs have not been undertaken using non-genuine spare parts. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. JCB Tools 3 Year Warranty excludes the following (where applicable): Components normally subject to wear such as carbon brushes.