Subscribe to Our Youtube Channel
Related Manuals for jcb JCB-20ID
Summary of Contents for jcb JCB-20ID
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL JCB-20ID Original Instructions IM-20ID-EN Iss: 02/2020...
- Page 2 Directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB-20ID Instruction & User Manual...
- Page 3 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-20ID Designation of the tool (20 - 20Vdc, ID - Impact Driver) JCB-20ID Instruction & User Manual...
-
Page 4: Table Of Contents
NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits ON/OFF Trigger Chuck Direction Selector Switch AUTOMATIC LED LIGHT and Overload Protection Repairs and Servicing, Maintenance, Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-20ID Instruction & User Manual... -
Page 5: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-20ID Instruction & User Manual... -
Page 6: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. JCB-20ID Instruction & User Manual... -
Page 7: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. JCB-20ID Instruction & User Manual... -
Page 8: Tool Specific Safety Warnings
JCB branded items, or similar equivalent quality. The use of low-grade 3. Safety instructions when using or modified items may result in failure and hammer mode possible operator injury. -
Page 9: Charger Safety
CHARGER SAFETY JCB chargers are designed to WARNING! operate on standard household supply voltages. Check the rating Read all safety warnings, instructions plate of the charger matches your and specifications provided with the local supply voltage. (Note: the dual charger. Failure to follow all instructions... -
Page 10: Component List
COMPONENT LIST Standard JCB-18VFC charger illustrated, additional chargers available. Battery size shown for illustrative purposes only BIT HOLDER CHUCK BATTERY RELEASE BUTTON RETAINING COLLAR BELT CLIP AUTOMATIC LED LIGHT CHARGER* - refer to page 11 for further information CHUCK DIRECTION SELECTOR... -
Page 11: Tool Technical Data
CHARGER TECHNICAL DATA Charger Code Input Data Output Data JCB-20VFC AC 220-240V, 50-60Hz, 70W 14.4 -20V d.c. 2.4A JCB-20VSFC AC 220-240V, 50-60Hz, 105W 14.4 -20V d.c. 4.0A JCB-20DC AC 100-240V, 50-60Hz, 200W 20.5V d.c. 2 x 3.5A JCB-20ID Instruction & User Manual... -
Page 12: Noise Information
(such as assessment of exposure. the times when the tool is switched off or running idle). JCB-20ID Instruction & User Manual... -
Page 13: Vibration Information
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE vibration tool use across a number of days. HAND-ARM VIBRATION SYNDROME (HAVS) IF USAGE IS NOT ADEQUATELY MANAGED JCB-20ID Instruction & User Manual... -
Page 14: Operating Instructions
Green Battery Charge Status Make sure the ON/OFF Trigger (4) is not operated when inserting or removing the Charger is connected to battery. Use only JCB batteries: JCB-20- mains power 15LI, JCB-20-20LI, JCB-20-30LI, JCB-20- Connected battery is 40LI and JCB-20-50LI. -
Page 15: Replacing Bits
To tighten fixings: Before engaging the ON/OFF Variable Speed Trigger (4), check that the hex bit tool holder Set the rotation selector switch to clockwise rotation. is correctly fitted in the bit holder chuck (1A). JCB-20ID Instruction & User Manual... -
Page 16: Automatic Led Light And Overload Protection
Never try to repair the tool yourself. power supply. Take to an authorised service centre. JCB-20ID Instruction & User Manual... -
Page 17: Repairs And Servicing, Maintenance, Transport And Storage
Power tool lubrication JCB power tools are properly lubricated in the factory and are ready for use. Repairs and servicing Power tools should be subject to periodic preventative maintenance to ensure continued safe and reliable operation. If the power tool requires servicing or repair (eg loss of power) do not continue to operate the power tool. - Page 18 JCB-20ID Instruction & User Manual...
-
Page 19: Warranty Statement
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. -
Page 20: General Certificate Of Conformity
IEC 55014-1:2017 IEC 55014-1:2006+A1+A2 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &... - Page 21 JCB-20ID Instruction & User Manual...
Need help?
Do you have a question about the JCB-20ID and is the answer not in the manual?
Questions and answers