Related Manuals for jcb 21-18CD
Summary of Contents for jcb 21-18CD
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL 21-18CD Original Instructions IM-18CD-EN Iss: 06/2021...
- Page 2 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. 21-18CD Instruction & User Manual...
-
Page 3: Table Of Contents
CHARGER TECHNICAL DATA NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits/Drills Power Switch Direction Selector Torque Setting Mode Selector Speed Control Maintenance Transport and Storage WARRANTY STATEMENT Terms and Conditions EU/UK DECLARATION OF CONFORMITY 21-18CD Instruction & User Manual... -
Page 4: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 21-18CD Instruction & User Manual... -
Page 5: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. 21-18CD Instruction & User Manual... -
Page 6: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. 21-18CD Instruction & User Manual... -
Page 7: Tool Specific Safety Warnings
Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. 21-18CD Instruction & User Manual... -
Page 8: Charger Safety
To reduce risk of injury, only charge if they have been given supervision JCB rechargable batteries. The or instruction concerning use of charger and battery packs are specifically the appliance in a safe way and designed to work together. - Page 9 21-18CD Instruction & User Manual...
-
Page 10: Component List
BELT CLIP GEARBOX SPEED SELECTOR SWITCH CHARGER* ON/OFF TRIGGER BATTERY PACK* - PLEASE REFER TO FORWARD/REVERSE SELECTOR TABLE ON PAGE 11 FOR BATTERY INFORMATION SWITCH BATTERY TEST BUTTON AND AUTOMATIC LED LIGHT CHARGE INDICATOR* *If applicable 21-18CD Instruction & User Manual... -
Page 11: Technical Data
64 dB(A) A-Weighted Sound Pressure (LpA) Concrete Drilling 68 dB(A) No Load A-Weighted Sound 75 dB(A) Power (LwA) Concrete Drilling 79 dB(A) & K 5 dB(A) Wear ear protection when sound pressure is over 80 dB(A) 21-18CD Instruction & User Manual... -
Page 12: Vibration Information
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE HAND-ARM vibration tool use across a number of days. VIBRATION SYNDROME IF USAGE IS NOT ADEQUATELY MANAGED. 21-18CD Instruction & User Manual... -
Page 13: Operating Instructions
Make sure the power switch is not pressed Charger is connected to in when inserting or replacing the battery. mains power Use only with JCB batteries: Connected battery is 21-20LI, 21-30-LI, 21-40LI and 21-50LI. charging Do not force the battery when Connected battery is fully connecting it, use moderate pressure. -
Page 14: Replacing Bits/Drills
If the accessory is not rotation to the left/unscrewing. properly positioned it could fly out when starting the tool. Check that the chuck jaws rest on the flat surfaces of the accessory. 21-18CD Instruction & User Manual... -
Page 15: Torque Setting
NOTE Check that the drill is correctly inserted Do not over-tighten screws. This risks and the chuck is properly tightened before damaging the screw head or thread. starting the tool. 21-18CD Instruction & User Manual... -
Page 16: Speed Control
Take to an authorised service centre. and for drilling holes with a large diameter. Move the speed control forwards towards the chuck to position 2 for high speed (0 to Transport and Storage 1600 rpm). 21-18CD Instruction & User Manual... - Page 17 Ensure that the tool is not at risk of tipping over or exposed to excessive vibration and shocks during transport, especially if the tool will be transported by car or other vehicle. NOTE Operating temperature: 0-40 °C Storage temperature: 20-60 °C 21-18CD Instruction & User Manual...
-
Page 18: Warranty Statement
Warranty cover commences from the date of purchase on the retail sales receipt and is valid only for JCB Tools products purchased within the UK bearing the CE and UKCA mark and a visible serial number. - Page 19 Repairs have not been undertaken using non-genuine spare parts. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. JCB Tools 3 Year Warranty excludes the following (where applicable): Components normally subject to wear such as carbon brushes.
-
Page 20: Eu/Uk Declaration Of Conformity
JCB-18CD-B, 21-18CD-B DECLARATION: EU Product Code No. JCB-18CD-B-E Factory Reference No. PLCDL-351JST Name: Yellow and Black Tools Ltd. (T/A: JCB Tools) IDENTIFICATION DETAILS OF Unit 55 Romsey Industrial Estate, Greatbridge Road Address: MANUFACTURER: Romsey, Hampshire SO51 0HR Country: Authorised Representative Service...