Table of Contents
Advertisement
*7
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
1
M
N#720
2
MbN: Select the desired alarm. a MOKN
3
MbN: Select the desired alarm option. a
MOKN
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (10 characters max.).
a MOKN
7
MbN: Select the desired alarm tone. a
MOKN
8
MbN: Select the desired snooze setting.
a MOKN
9
MOKN a M
N
Note:
R Press any dial key or M
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
TGD51xHK(en-en)_0731_ver013.pdf 25
Do not disturb mode
Do not disturb mode allows you to select a
period of time during which the handset will
not ring for outside calls. This feature is useful
for time periods when you do not want to be
disturbed, for example, while sleeping. Do not
disturb mode can be set for each unit. Using
the phonebook's category feature (page 19),
you can also select categories of callers
whose calls override do not disturb mode and
ring the handset (Caller ID subscribers only).
Important:
R If you have set the alarm, the alarm sounds
even if do not disturb mode is turned on.
Turning do not disturb mode on/off
1
M
2
MbN: Select the desired setting. a MOKN
3
Follow the directions on the display to
complete the operation.
Changing the start and end time
1
M
2
Follow the directions on the display to
complete the operation.
Setting the ring delay
This setting allows the handset to ring during
do not disturb mode if the caller waits long
enough. After the selected amount of time
passes, the handset rings. If you select "No
N to stop the
Ringing", the handset never rings during do
not disturb mode.
1
M
2
MbN: Select the desired setting. a MOKN
a M
Programming
N#238
N#237
N#239
N
2019/07/31 17:21:42
25
Advertisement
Table of Contents
