Smart Remote Head Option; Usb Control Of The Op735 - OptoTest OP735 Instruction Manual

OP735

Smart Remote Head Option

The OP735 when manufactured has the option of having a digital OPM port. This
port interfaces with a smart remote head and/or a smart integrating sphere. When
no remote head is connected the unit will function normally as described in this
manual.
For the remote head to be properly loaded by the system, the remote head
should be connected while the unit is powered down. Connect the remote head
to the mainframe and power up the system. Linearity and absolute calibration are
established by the remote head, not the mainframe.

USB Control of the OP735

The OP735 can be controlled via the USB bus. Upon request, OptoTest can supply
the appropriate DLLs along with sample programs to facilitate the software creation
process. For these DLLs please contact sales@optotest.com.
11 of 12