Optoma ZU820TST User Manual page 60

USING THE PROJECTOR
Change Logo
Change the logo for the startup screen. Apart from the Default logo, user can select from Default, Neutral,
User Logo, and Captured Logo.
‡ Default: The projector default logo.
‡ Neutral: The logo is not displayed on the startup screen.
‡ User Logo: The user logo uploaded from the web control panel.
‡ Captured Logo: The logo saved via the Logo Capture function.
Note:
The supported logo format is PNG and size is 1920 x 1200 pixels.
Logo Capture
Capture part of the projected image and save it as a customized logo.
Delete Logo
Delete the saved customized logo, including the Captured Logo and Use Logo.
High Altitude
Select On to increase the fan speed. To ensure the image quality and prevent damage to the projector, enable High
Altitude mode in high temperature, high humidity, or high altitude environment.
User Data
User can save the projector settings as user data and reload the settings later.
‡ Save all settings: Save all of the projector settings as user data. User can save up to 5 records.
Load all settings: Load the previously saved user data.
‡
System Update
Update the system automatically or manually.
‡ Auto: System checks for new updates automatically every time it is connected to the Internet.
‡ Auto Download: When both "Auto" and "Auto Download" are On, new updates will be downloaded
automatically when the projector is restarted.
Note:
1. When new updates are downloaded automatically, there will be no prompts.
2. When the Power Off button is pressed, if the download is complete, a prompt to update will pop up.
3. Select the Update option to start the update.
‡ Update: Manually update the system firmware.
Reset
Reset the settings to factory default values.
Reset OSD: Reset OSD settings to default values.
‡
‡ Reset to Default: Reset all projector settings to default values.
Reset Selective: Reset the settings of one of the main menus. User can choose from Image, Display,
‡
Input, Communication, and Setup.
60 English