Table of Contents
Advertisement
USING THE PROJECTOR
‡
Red / Green / Blue Gain: Adjust the color of the image's bright areas.
‡
Red / Green / Blue Offset: Adjust the color of the image's dark areas.
White Enhancement
Adjust the image color brightness while providing more vibrant colors, in increments from 0 to 10.
Color Space
Select a color space that has been specifically tuned for the input signal. The available options are Auto
(default), RGB (0~255), RGB (16~235), REC709, and REC601.
Color Matching
Change the color of a projected image by adjusting each color component in the image. The adjustable color
includes Red, Green, Blue, Cyan, Yellow, and Magenta (R / G / B / C / Y / M).
Auto Test Pattern: Enable the function to view a specific color pattern while adjusting.
‡
‡
R / G / B / C / Y / M: Select a color for further adjustment.
Hue: Adjust the hue of the selected color. The value reflects the number of degrees of
±
rotation around the chromaticity diagram from the original color. Increasing value indicates
counterclockwise rotation, and decreasing value, clockwise rotation.
±
Saturation: Adjust the saturation of the selected color. The value indicates the color shifts from
or towards the white in the center of the chromaticity diagram.
Luminance: Adjust the luminance of the selected color. Increase the value to brighten the
±
image (add white to a color) or decrease the value to darken the image (add black to a color).
‡
Reset: Reset the function settings to factory default values.
Note:
When 3D, 2D High Speed, or Blending mode is selected, the Color Temperature and White Enhancement
will be unavailable.
Wall Color
Set the wall color of the projector to achieve best color performance for a specific wall. The available options are
Off, Blackboard, Light Yellow, Light Green, Light Blue, Pink, and Gray.
3D Setup
3D video file combines two slightly different images (frames) of the same scene representing the different views
that the left and right eyes see. When these frames are displayed fast enough and viewed with 3D glasses
synchronized with the left and right frames, the viewer's brain then assemble the separate images into a single 3D
image. 3D Menu provides options to set up the 3D functions to correctly display 3D videos.
3D Mode
Enable or disable the 3D function.
3D Format
Select a proper 3D format for the 3D input signal. The available options are Auto, Frame Packing, Side by
Side, Top and Bottom, and Frame Sequential.
3D Tech
Select a proper 3D technology according to how the 3D sync signal is processed.
‡
DLP-Link: Select DLP-Link when the 3D sync signal is generated by the DLP Link technology built
into the projector. DLP Link works only with the glasses that are compatible with DLP 3D technology
and the 3D function is enabled.
3D Sync: Select 3D Sync when the 3D sync out signal is sent to an emitter or another projector
‡
through the 3D sync out port.
45
English
Advertisement
Table of Contents
