Optoma ZU820TST User Manual page 46

USING THE PROJECTOR
3D-2D
Transform the 3D content to 2D images.
‡ 3D: Play the 3D content normally.
‡ L: Play the left images of the 3D content.
‡ R: Play the right image of the 3D content.
3D Sync Out
Set up the transmission of the 3D sync output signal.
‡ To Emitter: Send the 3D sync signal to the emitter connected to the 3D sync out port.
To Next Projector: Send the 3D sync signal to next projector when using multiple projectors.
‡
3D Invert
When the 3D video does not appear correctly, use this function to invert the 3D left and right frames.
Frame Delay
Set a frame delay value for the projector to correct the time difference between the 3D signal being given and
the result being executed.
Reset
Reset the function settings to factory default values.
Note:
When 2D High Speed or Blending mode is selected, the 3D Tech, 3D-2D, 3D Sync Out, 3D Invert,
Frame Delay will be unavailable.
Save to User
Save the image settings to the User mode.
Apply to User
Apply the image settings to User-Presentation, User-Bright, User-Cinema, User-HDR, User-sRGB, User-DICOM
SIM., User-Blending, User-3D, or User-2D High Speed.
Reset
Reset all the image settings to factory default values.
46 English