Optoma ZU820TST User Manual page 43

USING THE PROJECTOR
Note:
‡
When 3D mode is selected, the Presentation, Bright, Cinema, HDR, sRGB, DICOM SIM., Blending,
and 2D High Speed mode will be unavailable.
‡
When 2D High Speed mode is selected, the Presentation, Bright, Cinema, HDR, sRGB, DICOM SIM.,
Blending, and 3D mode will be unavailable.
‡ When Blending mode is selected, the HDR, 3D, and 2D High Speed will be unavailable.
Dynamic Range
Configure the High Dynamic Range (HDR) setting and its effect when displaying video from 4K Blu-ray players and
streaming devices.
Note:
Only HDMI supports the Dynamic Range function.
HDR (High Dynamic Range)
Off: Turn off HDR Processing. When set to Off, the projector will NOT decode HDR content.
‡
‡ Auto: Auto detect HDR signal.
HDR Picture Mode
‡ Bright: Choose this mode for brighter more saturated colors.
‡ Standard: Choose this mode for natural looking colors with a balance of warm and cool tones.
‡ Film: Choose this mode for improved detail and image sharpness.
‡ Detail: The signal comes from OETF conversion to achieve the best color matchings.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
Film
For home theater.
Graphics
For PC / Photo source.
Standard (2.2)
For standardized setting.
Vivid
Best for playing games. In this mode, color saturation and brightness are well-balanced.
3D
Best for playing 3D videos.
43
English