Accessories; Accessories Supplied; Remote Control Batteries - Panasonic Viera TH-50VX100 Operating Instructions Manual

Accessories

Accessories Supplied

Check that you have the Accessories and items shown
Operating
Instruction book
Fixing band × 1

Remote Control Batteries

Requires two AA batteries.
1. Pull and hold the hook, then open the battery cover.
Hook
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
6. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
7. Make a note of the remote control codes before changing batteries in case the codes are reset. (see page 44)
8
Open
Remote Control
Transmitter
N2QAYB000323
POS.
/SIZE PICTURE
DISPLAY
FUNCTION
PC COMPO.
HDMI
VIDEO
CH INPUT
MENU
EXT.SCALER OFF TIMER
MEM.
LOAD
DISPLAY
AC cord
2. Insert batteries - note correct polarity ( + and -).
"AA" size
Batteries for the
Remote Control
Transmitter
(2 × AA Size)
Close