Scrolling Bar And Test Patterns Functions; Ext. Scaler Function - Panasonic Viera TH-50VX100 Operating Instructions Manual

SCROLLING BAR and TEST PATTERNS functions

Pressing activates one of the following two functions. The function button setting can be configured by accessing
"Function button assign" in the OPTIONS menu. (see page 42)
SCROLLING BAR
Press
SCROLLING BAR
SCROLLING BAR
YES N O
Activates the SCROLLING BAR ONLY screensaver. After
15 minutes, the display enters standby mode.
SCROLLING BAR ONLY
To exit this mode, press any button.
Note:
AUTO POWER OFF is deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 37)

EXT. SCALER function

Each time you press
EXTERNAL SCALER MODE ON
OFF: Use the built-in scaler.
ON: Use an external scaler.
The setting is valid with the following signals.
1125 (1080) / 24p • 25p • 30p • 50p • 60p
With input signals other than these, specifying "ON" will display the following message.
Input signal must be 1125p(1080p)
EXTERNAL SCALER MODE ON
Note:
You can also turn the built-in scaler ON and OFF by accessing "EXTERNAL SCALER MODE" in the SET UP menu.
(see page 36)
Press to
select
"YES".
Press.
, an external scaler is activated or deactivated.
TEST PATTERNS
Press
TEST PATTERNS
TEST PATTERNS
YES N O
Each time you press , a different test pattern is
displayed (seven in all).
Color Bars
Black 1% window
To exit this mode, press any button other than
Basic Controls
Press to
select
"YES".
Press.
Red Green
Frame
(2 lines × 2 dots) Blue
.
17