Initial Selections; Selecting The Input Signal; Selecting The On-Screen Menu Language - Panasonic Viera TH-50VX100 Operating Instructions Manual

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.
INPUT
INPUT
HDMI1
HDMI2
HDMI3
HDMI4
COMPONENT
PC
Using dedicated buttons for input selection
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 39)
• Image retention (image lag) may occur on the plasma display panel when a still
picture is kept on the panel for an extended period. The function that darkens the
screen slightly is activated to prevent image retention (see page 45), but this function
is not the perfect solution to image retention.

Selecting the On-Screen Menu Language

14
Press to select the input signal to be played back from the
equipment which has been connected to the Plasma Display.
HDMI signal terminal in SLOT1
HDMI signal terminal in SLOT2
COMPONENT or RGB signal terminal in SLOT3
PC signal terminal in PC IN
Press to select HDMI signal terminals 1–4 in SLOT 1 and 2.
Press to select component or RGB signal terminal in SLOT 3.
Press to select PC signal terminal in PC IN.
Press to display the menu screen.
Press to select "SET UP".
Press to display the SET UP menu.
Press to select
OSD LANGUAGE.
Press to select your
preferred language.
Selectable languages SET UP menu
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
(Japanese)
Русский (Russian)
INPUT MENU ENTER/ ■
INPUT MENU
PICTURE
SET UP
POS. /SIZE
SOUND
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
EXTERNAL SCALER MODE OFF
POWER SAVE OFF
OSD POSITION UPPER LEFT
ENGLISH ( US )
OSD LANGUAGE
PC PC COMPO. COMPO.
HDMI HDMI
CH CH INPUT INPUT
DISPLAY
■
ENTER/
HDMI