Power On / Off - Panasonic Viera TH-50VX100 Operating Instructions Manual

Power ON / OFF

Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 9)
Connecting the plug to the Wall Outlet.
Note:
When disconnecting the AC cord, be absolutely sure to
disconnect the AC cord plug at the socket outlet first.
Press the Power switch on the Plasma Display to
turn the set on: Power-On.
Power Indicator: Green
When first switching on the unit
Following screen will be displayed when the unit is
turned on for the first time.
Select the language with the remote control. Unit
buttons are invalid.
1
Select the language.
2
Set.
Notes:
• Once the language is set, this screen won't be displayed when switching on the unit next time.
• After the setting, language selection can be done from the SET UP menu. (see page 14)
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns orange in the power off state.
button on the remote control to turn the Plasma Display off.
button on the remote control to turn the Plasma Display on.
INPUT MENU OK
INPUT
From the second time
OSD LANGUAGE
on, the below screen is
English (UK)
displayed for a while (setting
Deutsch
condition is an example).
Français
Italiano
Español
ENGLISH (US)
Русский
switch on the unit, when the
Power Remote Control
Indicator Sensor
MENU
PC
FULL
HDMI
13