Panasonic Viera TH-50VX100 Operating Instructions Manual page 24

PICTURE Adjustments
● 3:2
When "ON", the display attempts to reproduce a more natural
interpretation of sources such as movie pictures, which are
PULLDOWN
recorded at 24 frames per second.
If the picture is not stable, turn the setting to "OFF".
Note:
When "ON", this setting only affects the following signal input:
• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during "COMPONENT" input signal.
● STUDIO GAIN
Sharpens the contrast for a better view when a part of the image
is too light to see.
OFF: Disables "STUDIO GAIN".
ON: Enables "STUDIO GAIN".
Notes:
• "STUDIO GAIN" can be modified when "Studio mode" in the OPTIONS menu is "On". When "Studio mode" is "Off",
this setting is "OFF" and cannot be changed. (see page 42)
• This setting is valid only when the input signals are as follows:
Component Video, RGB (analog), SDI, HDMI
● NOISE REDUCTION
[Advanced NR]
Sets the three NR functions separately.
Select "ADVANCED".
1
NOISE REDUCTION
VIDEO NR
MOSQUITO NR
BLOCK NR
Select the item and set.
2
NOISE REDUCTION
VIDEO NR
MOSQUITO NR
BLOCK NR
VIDEO NR:
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR:
Notes:
• "NOISE REDUCTION" cannot be adjusted while a PC signal is being applied.
• "BLOCK NR" cannot be adjusted while a HD signal is being applied.
NORMALIZE
Helpful Hint (
On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if the OK button is pressed during
"NORMALIZE", then all adjustment values are returned to the factory settings.
24
Sets the following three NR (Noise Reduction) functions together.
VIDEO NR, MOSQUITO NR, BLOCK NR
ADVANCED
OFF
OFF
OFF
ADVANCED
OFF
OFF
OFF
Automatically reduces unwanted picture noise.
Reduces block noise when playing MPEG videos.
Normalization)
OFF
ADVANCED
select
OFF
MAX
2 set
1
select
OFF ON
OFF ON
MIN
MAX MID
MIN
MID