Uludag G-400 Manual page 29

1- Warranty term starts as of the delivery date and lasts 2 (two) years.
2- The complete commodity including all of the parts are under the warranty of our company.
3- If the commodity has some defects in the course of warranty term, the period used for the corrective
action will be added to the warranty term. Maximum period of the repair time is thirty working days.
This term starts from the date of informing the service station, and in the absence of service station,
one of authorities among sales company, dealer, representitive, import company or manufacturer.
If the defect of the commodity is corrected within 15 working days, the manufacturer is obliged to
provide the consumer with another commodity having similar specifications to be used till the end
of repair.
4- If the commodity breaks down in the case of failures arising from either material and workmanship
or the assembly within the warranty term of commodity, the repair will be carried out without
claiming any charge for labour cost, cost of replaced parts and other cost under any name.
5- Despite the fact that the consumer exercises his/her right of repair, if, regarding the commodity,
there is;
• a continuity of not making use of the commodity, owing to the fact that the same failure repeats
more than twice, or separate failures happen more than four times, or the total number of
different failures within the warranty term is more than 6, in one year with the condition of being
within the warranty term as of the delivery date,
• a situation that repair time exceeds the maximum required time limit for repair,
• the commodity will be replaced in the case of the determination of impossibility to repair the defect,
according to the report arranged by one of the relevant authorities among sales company, dealer,
agent, representitive, import company or manufacturer,in the absence of service station.
6- The failures arising from the use of machine opposed to the conditions specified in the user manual
are not included in the scope of warranty.
7- General Directorate of Consumer and Competition Protection belonging to the Ministry of Industry
and Trade can be consulted in case of disagreement that may happen related to warranty deed.
8- After the delivery of the commodity to the consumer, the failures which are caused by the incorrect
transportation, incorrect/insufficient cleaning and maintenance, misuse of the machine, accident,
impact, vertical operation and similar reasons, are not covered by warranty enclosure.
9- The present warranty deed is valid for the consumers defined in the Consumer Protection Law, No:
4077.
AUTHORIZED SERVICE
Conpany : Uludağ Makine Mobilya Aks.ve Hırd. San.Tic. Ltd. Şti.
Address : Orhanlı Merkez Mah. Karadeniz Cad. Turgut Reis San. Sitesi A5-A6 Blok no:1 Tuzla/
İstanbul
Tel: +90 216 394 18 38 Pbx • Fax: +90 216 394 18 42
info@uludagmakina.com.tr • www.uludagmakina.com.tr
This Manual for Introduction, Operation and Maintenance, Warranty Deed and AT (CE)
Conformity Statement can not be reproduced in whole or in part without duly permission of
ULUDAĞ MAKİNA Mobilya Aks. ve Hırd. San. Tic. Ltd. Şti. All rights are reserved.
TERMS OF WARRANTY
Uludağ Makina Mobilya Aks. ve Hırd.San.Tic.Ltd.Şti.