Machine Specifications; Distinctive And Technical Specifications Of The Machine; Electrical Diagram For The Machine - Uludag G-400 Manual

Measure: Failure at the electric motor. Call Uludağ Makina or service agent.
6. Saw blade wobbles while rotating.
Cause: Distortion of connection with sawblade due to hit while in transport or moving, etc.
Measure: Apply to the nearest dealer for replacement with the original spare part.
7. Saw blade wobbles while rotating.
Cause: There are sawdust fragments on the sawblade connections of sawbladegroup.
Measure: Disassemble sawblade part and clean thoroughly.
8. Saw blade wobbles while rotating.
Cause: distortion of sawblade due to hit.
Measure: Replace the blade.

8. MACHINE SPECIFICATIONS

8.1. Distinctive and Technical Specifications of the Machine

Gerilim
Güç
Frekans
Devir
Testere Çapı
Açılar
Hassas Açılar
Max. Kesme
Yüksekliği
Max. Kesme Genişliği 90°= 120(h) 200(l)mm
Max. Kesme Genişliği 45°= 120(h) 140(l)140mm
Ağırlık

8.2. Electrical diagram for the machine

For mono-phase electric
220V-380V
1,5KW / 2 Hp
50– 60 HZ
3000 Rpm
400 MM
0°, 15°, 22.5°, 30°, 45°
0°, 45°
90°= 135(h) 150(l)mm
59
For three-phase electric motor; motor;